Vtl And Ptt Cabling - Fujitsu ETERNUS CS800 S5 User Manual

Connecting the System with the Network

VTL and PTT Cabling

Entry System
Connect the FC cables for VTL or PTT as shown in
Figure 60: VTL and PTT Cabling for Entry System with FC option
The usage of the FC ports has been pre-configured in the factory as follows:
The lower port is configured for PPT, the upper port is configured for VTL.
●
The port role can be changed on page Configuration > PTT > FC Initiators & Targets
●
of the Remote Management Console.
Scale System
Scale systems are delivered with three dual ports 8 Gb/s FC controllers in PCI slot 1, slot 2
and slot 5. The upper ports of the controllers in the PCI slots 1 and 2 are used to connect
the storage module. Each of the other four ports can be used either for VTL or PTT.
Connect the FC cables for PTT and VTL as shown in
Figure 61: VTL or PTT Cabling
100
6 5
6 5
PTT or VTL
2 x 8 Gb/s FC
Installing the ETERNUS CS800 S5 Modules
Figure 60.
4
Figure 61.
PTT or VTL
1 x 8 Gb/s FC
3 2 1
PTT or VTL
2 x 8 Gb/s FC
4 3 2 1
PTT or VTL
1 x 8 Gb/s FC
U41840-J-Z125-7-76