Additional Specifications For Entry Model - Fujitsu ETERNUS CS800 S5 User Manual

Additional Specifications for Entry Model

Compliance with Standards
Product Safety
Electromagnetic Compat-
ibility
Electromagnetic
Immunity
CE Certification
Environmental
Compliance
Compliance Notes
Compliance Link
Table 42: Compliance with Standards
Additional Specifications for Entry Model
Selected Server Specifications
Weight
Disks
Interface to JX40 Storage
Module
Service Port
iRMC Port
(Console Device)
Internal RAID Controller
RAID Level
Table 43: Selected Server Specifications for Entry
624
UL60950-1, CSA60950-1, EN60950-1, IEC60950-1, GOST
FCC Part-15 Class A, ICES-003 Class A, EN55022 Class A, VCCI Class
A, AS/NZS CISPR22 Class A, CNS13438(C6357) Class A, C-Tick, BSMI
EN 55024
Electromagnetic Compatibility Directive 2004/108/EC, Low Voltage
Directive 2006/95/EC
RoHS-compliant (Restriction of Hazardous Substances), WEEE-
compliant (Waste Electrical and Electronically Equipment)
There is general compliance with the safety requirements of all European
countries and North America. National approvals required in order to
satisfy statutory regulations or for other reasons can be applied for on
request.
http://globalsp.ts.fujitsu.com/sites/certificates/default.aspx
Approx. 25 kg
4 × 2.5" 600 GB SAS hard disk (10,000 rpm) and 6 or 12 × 2.5" 1 TB SATA
hard disk (7,200 rpm)
LSI GEN3 - SAS 6G RAID Controller
1 GbE
1 GbE
LSI GEN3 – SAS 6G
RAID 1 (1 + 1) for Operating System, StorNext and blockpool metadata
RAID 6 (4+2) for backup data
System Specifications S5
U41840-J-Z125-7-76