VTL
Remote Host Mapping And Groups
The Remote Host Mapping And Groups section displays the following information for all
host access groups on the ETERNUS CS800:
Group Name - The name of the group.
●
Remote Host - The host (initiator) associated with the group.
●
Target Port - The Fibre Channel port (target) associated with the group.
●
Partition Name - The VTL partition associated with the group.
●
Devices - The number of virtual media changers (VMCs) and virtual tape drives (VTDs)
●
associated with the group.
I
Adding a Remote Host Access Group
Add a host access group to associate a VTL partition with a host (a Fibre Channel initiator
on the SAN) and a target (a Fibre Channel port on the ETERNUS CS800).
To add a host access group:
1. Click Add.
The Map Remote Hosts, Define Groups page displays (see
224
Click a column heading to sort the rows in the table by that column. Click the column
heading again to reverse the sort order.
Configuration
Figure
141).
U41840-J-Z125-7-76