Step 3: Add Lsus - Fujitsu ETERNUS CS800 S5 User Manual

OST Wizard
Figure 99: OST Wizard: Add Storage Servers

Step 3: Add LSUs

1. Enter information about the LSU (see
●
●
●
156
Storage Server - Select the storage server that will contain the new LSU.
Use Available Capacity - Select this option to add an LSU that uses the available
capacity on the system.
You cannot add an available capacity LSU to a storage server that already contains
an LSU. Also, if you add an available capacity LSU to a storage server, you cannot
add additional LSUs to that same storage server.
I
After you add an LSU that uses the Available Capacity option, you cannot
change the LSU to use the Specific Capacity option. Instead, you must
delete the LSU, then add a new LSU and choose the Specific Capacity
option.
Specify Capacity - Select this option to specify the physical capacity of the LSU,
and then enter the following information.
LSU Name - Enter the name of the LSU.
●
Physical Capacity - Enter the physical capacity of the LSU (1 to 1048576 GB).
●
Figure 100).
Configuration Wizards
U41840-J-Z125-7-76