Dx80 S2 Expansion Modules (Optionally, With Scale Model Only) - Fujitsu ETERNUS CS800 S5 User Manual

Storage Modules

DX80 S2 Expansion Modules (optionally, with Scale model only)

ETERNUS DX80 S2 storage expansion modules are used in the ETERNUS CS800 S5
system to provide additional capacity (backup data storage). Each storage expansion
module contains 12 3.5-inch NL-SAS hard disk drives in the front (in the same way as the
storage base module) and two power supplies (with fans) in the rear.
Front View – Panel Features and Indicator
Figure 30: Front view of the Storage Expansion Module
Figure 31: LEDs on the front side of the Storage Expansion Module
LED name
LINE LED
FAULT LED
POWER LED
Table 13: Status and meanings of each LED (in front of Storage Expansion Module)
70
LINE LED
FAULT LED
POWER LED
LED status Description
green AC power is supplied to the module.
orange The module is in error status.
green The module is operating normally.
Hardware Description and Basic Operations
U41840-J-Z125-7-76