Setting Up The Rack - Fujitsu ETERNUS CS800 S5 User Manual

Installing the Rack

Setting up the rack

Introduction
To ensure that the rack has a firm foothold, it is necessary to align it in all 3 axis exactly
horizontal.
Required tools
The following tools are required to perform this task:
Hexagon key 6 mm
●
Spirit level
●
Figure 39: Screwing down the leveling feet
Screw down the four leveling feet using a 6 mm hexagon key.
●
I
U41840-J-Z125-7-76
4x
The leveling feet are easier to adjust if not carrying the full weight of the rack. If
necessary, please ask another person to tilt the rack slightly in order to relieve the
leveling foot in question.
Handling Instructions for the Rack
87