Handling Instructions for the Rack
Positioning the tilting protection
Slide the tilting protection under the rack so that it is in the center at the front.
●
Position the two front screw holes (1) of the tilting protection so that they are exactly
●
under the lozenge nuts (2).
3
Installing the tilting protection at the front
Lift the tilting protection slightly so that the screw holes align with the lozenge nuts.
●
Attach the tilting protection to the front of the rack with two supplied M6 x10 mm
●
countersunk screws (1).
Torque: 5.2 Nm
90
3
2
1
1
1
2
1
Installing the Rack
U41840-J-Z125-7-76