Backup Application Specific - Fujitsu ETERNUS CS800 S5 User Manual

Configuration
Vendor - The vendor of the library or drive.
●
Product ID - The product ID (name) of the library or drive.
●
State - The state of the library or drive (Enabled or Disabled).
●
Drive Type - (Tape drives only) The drive type of the drive.
●
Use the Physical Device Discovery page to perform the following tasks:
To discover an attached physical tape library and tape drives, click Scan. Attached
●
physical libraries display in the list.
To enable or disable a physical library, select it in the list, and then click Enable or
●
Disable. (You can also right-click a library to enable or disable it.)
I
To view the drives in an attached library, select the library in the list. All drives in the
●
selected library display below.
To enable or disable tape drives, select one or more drives in the list, and then click
●
Enable or Disable. (You can also right-click a drive to enable or disable it.)
I
To remove a physical library from the list, first disconnect the Fibre Channel cables that
●
connect the library to the ETERNUS CS800, and then click Scan.
To update the libraries or drives list with the latest information, click Refresh.
●

Backup Application Specific

The Backup Application Specific page allows you to create and manage authenticated
users for use with the path to tape capability.
The following applications are supported for backup application specific path to tape:
Symantec NetBackup
●
Symantec Backup Exec
●
EMC Networker before version 8.1
●
Oracle Secure Backup
●
Atempo Time Navigator
●
U41840-J-Z125-7-76
To use a physical library, it must be enabled. If you enable or disable a library,
all tape drives in the library are also enabled or disabled.
To use a tape drive, it must be enabled. To enable a drive, the parent library
must be enabled.
PTT
271