Step 5: Add Share - Fujitsu ETERNUS CS800 S5 User Manual

Configuration Wizards
Figure 89: NAS Wizard: Share Access

Step 5: Add Share

1. Under Add Share, enter information about the NAS share (see
●
●
●
●
●
U41840-J-Z125-7-76
Name - Enter the name of the NAS share.
Description - (Optional) Enter a brief description of the share.
Enable deduplication - Select the check box to enable data deduplication. Fujitsu
Technology Solutions recommends that you enable data deduplication to optimize
disk usage.
I
Data deduplication is enabled by default. You cannot enable or disable data
deduplication after the share is added.
Hide from network browsing - (Windows shares only) Select the check box to
hide the share from network browsing. If selected, you cannot see the share when
browsing the network.
Export Protocol - (Available only if you selected the Both option in
Protocol" on page 139) Select the export protocol for the share:
CIFS - Select the CIFS option to use the share on a Windows network.
●
NFS - Select the NFS option to use the share on a UNIX or Linux network.
●
NAS Wizard
Figure 90):
"Step 2:
143