Environmental Protection - Fujitsu ETERNUS CS800 S5 User Manual

Environmental Protection

Environmental Protection
Environmentally-friendly Product Design and Development
This product has been designed in accordance with the Fujitsu standard for "environmen-
tally friendly product design and development". This means that key factors such as
durability, selection and labeling of materials, emissions, packaging, ease of dismantling
and recycling have been taken into account.
This saves resources and thus reduces the harm done to the environment.
Energy-saving Information
Devices that do not need to be constantly switched on should be switched off until they are
needed as well as during long breaks and after completion of work.
Packaging Information
Do not throw away the packaging. You may need it later for transporting the system. If
possible, the equipment should only be transported in its original packaging.
26
If necessary, have other people help you mount the individual components in
●
the rack because of the weight involved.
When connecting and disconnecting cables, observe the relevant instructions
●
in the "Important Information" chapter of the technical manual for the corre-
sponding rack. The technical manual is supplied with the corresponding rack.
Route cables in such a way that they do not form a potential hazard (make sure
●
no one can trip over them) and that they cannot be damaged.
The rack must be connected to the power supply by an authorized electrician
●
approved by the local utility company.
If the rack model is integrated into an installation that draws power from an
●
industrial power supply network with an IEC309 type connector, the power
supply's fuse protection must comply with the requirements for non-industrial
power supply networks for the type A connector.
An ETERNUS CS800 configuration can carry a leakage current > 3.5 mA.
●
Therefore, a ground connection must be established before connecting to the
mains.
Important Information
U41840-J-Z125-7-76