Configuration Wizards
Figure 106: Replication Wizard: NAS Shares
Step 4: VTL Partition
1. Select a VTL partition in the Replication Settings for VTL Partitions section to
manage its replication settings (see
I
2. To configure the partition to replicate its data to another system, enter the following
information under Send:
a) Select the Enable replication for selected partition check box to enable repli-
U41840-J-Z125-7-76
For help adding VTL partitions to the system, use the VTL Configuration Wizard
(see
"VTL Wizard" on page
cation for the partition.
Figure
107).
145).
Replication Wizard
165