Fujitsu ETERNUS CS800 S5 User Manual page 278

OST
optionally use the replication channel.) When a data IP address is mapped to a replication
IP address, OST traffic that is sent to one of the IP addresses is routed to the other IP
address as necessary.
I
To access the Target IP Mapping page, on the OST page, click the Target IP Mapping tab
(see Figure
Figure 164: Target IP Mapping Page
Use the Target IP Mapping page to perform the following tasks:
View information about mapped data and replication IP addresses (see
●
Mapping List" on page
Map a target data IP address to a replication IP address (see
●
Address" on page
Edit the mapping for a target data IP address (see
●
page
264
Fujitsu does not recommend mapping multiple data IP addresses to a single
replication IP address. If you have mapped multiple data IP addresses and the
routing is not working, try removing the additional data IP addresses, and map only
a single data IP address.
164).
265).
265).
266).
"Mapping a Target IP
"Editing a Mapped IP Address" on
U41840-J-Z125-7-76
Configuration
"Target IP