Notifications
Figure 199: Destinations Page
Use the Destinations page to perform the following tasks:
View information about SNMP destinations (see
●
Add an SNMP destination (see
●
Edit an SNMP destination (see
●
Delete an SNMP destination (see
●
Trap Destination List
The Trap Destination List displays the following information about SNMP destinations:
IP Address - The IP address of the destination.
●
Name - The name of the destination.
●
Selected Traps - The traps the ETERNUS CS800 sends to the destination (Failure,
●
Warning, Informational, Available, or Unavailable).
Adding a Destination
Add an SNMP destination to send traps from the ETERNUS CS800 to the destination.
I
322
You can add up to 5 destinations.
"Trap Destination List" on page
"Adding a Destination" on page
"Editing a Destination" on page
"Deleting a Destination" on page
Configuration
322).
322).
324).
325).
U41840-J-Z125-7-76