Projector Configurations - Barco HDF W22 User And Installation Manual

2. Configurations, requirements and restrictions
2.4 Projector configurations
The drawings used in this chapter are not contractual. For convenience some options available in the HDF
series projectors (e.g. standalone cooling unit in the laser version), are not shown here.
The different configurations
Depending on the installation the projector can be mounted in different ways, the 4 different configurations are:
1. Front / Table (F/T)
2. Front / Ceiling (F/C)
3. Rear / Table (R/T)
4. Rear / Ceiling (R/C)
Front projection
The projector is installed, either in a table mount or ceiling mount configuration, at the same side of the screen as the audience.
F/C
F/T
Image 2-6
Front projection
Rear projection
The projector is installed, either in a table mount or ceiling mount configuration, at the other side of the screen opposite the audience.
Image 2-7
Rear projection
22
AUDIENCE
FLOOR
AUDIENCE
FLOOR
BACKSTAGE
R5905158 HDF SERIES 08/12/2016
R/C
R/T