Auto Dimming When No Signal - Barco HDF W22 User And Installation Manual

11. Lamp

11.5 Auto dimming when No Signal

About auto dimming
When no signal is detected on the selected input the lamp power will be reduced from the current value to its minimum value. When
the input signal is re-detected, the lamp power is restored to its original value.
This function is a duplicate of the Auto dimming in the Input menu.
How to set up
1. Press Menu to activate the menus and select Lamp → Power → Auto Dimming No Signal.
Image 11-10
Main menu, lamp
Image 11-12
Auto dimming no signal
2. Press ENTER to toggle between [On] or [Off].
[On] : when no signal, auto dimming is started.
[Off] : when no signal, no auto dimming is started.
212
Image 11-11
Lamp, power
R5905158 HDF SERIES 08/12/2016