Warp Board Reset - Barco HDF W22 User And Installation Manual

12.8.22 Warp board reset

What can be done?
In some circumstances the hardware of the warping get stuck. A hard reset of the board is the only solution. With Warp board reset,
the board is reset but the current values remain in the board.
How to reset the board
1. Press Menu to activate the menus and select Alignment → Warping → .Warp board reset.
Image 12-91
Main menu, alignment
Image 12-93
Warp board reset
2. Press ENTER to start the board reset.
R5905158 HDF SERIES 08/12/2016
Image 12-92
Alignment, Warping
12. Alignment
257