Minimum Delay - Barco HDF W22 User And Installation Manual

8.5

Minimum delay

Purpose
The minimum delay only affects the de-interlacing. In case of interlaced sources, the de-interlacer will be bypassed and the image
will be shown with line interpolation applied.
To ensure minimum delay in the other processing steps, make sure warping is OFF, the resolution of the input source is native and
the input locking is set to the main input.
How to toggle the delay
1. Press Menu to activate the menus and select Input → Minimum delay [On].
Image 8-19
Main menu
2. Press ENTER to toggle between [On] and [Off].
[On] : images displayed with minimum delay
[Off] : images displayed without minimum delay
R5905158 HDF SERIES 08/12/2016
Image 8-20
Input, minimum delay
8. Input
113