Gsm Configuration, Activation - Barco HDF W22 User And Installation Manual

13.13 GSM Configuration, activation
Only possible when a GSM module with SIM card is installed in the projector.
What can be done ?
To configure the projector software with the installed SIM card, a correct PIN code (4digits) must be entered.
As the PIN code cannot be checked with the one on the SIM card, ensure to enter the correct PIN code.
When your SIM card is blocked, you have to remove the SIM card from the GSM module and to insert the SIM
card in a mobile phone so that you can enter the PUK code to unblock the SIM card.
How to configure
1. Press Menu to activate the menus and select Projector Control → GSM configuration → GSM pincode.
Image 13-131
Main menu, projector control
Image 13-133
GSM configuration
2. Select Pin code and press ENTER.
A PIN code input field appears.
Image 13-135
Device configuration, PIN code
3. Enter the 4 digit PIN code corresponding with the mounted SIM card. Use the digit keys on the remote control or the local keypad.
Each digit is replaced by an asterisks.
R5905158 HDF SERIES 08/12/2016
Image 13-132
Projector control, GSM configuration
Image 13-134
GSM pincode
13. Projector Control
347