Sync Loop Through - Barco HDF W22 User And Installation Manual

12.15.3 3D Sync Loop Through
What can be done?
The incoming 3D sync signal can routed to the 3D sync output connector.
How to activate
1. Press Menu to activate the menus and select Alignment → 3D Glasses.
Image 12-167
Main window
2. Press ENTER.
3. Use the ▲ or ▼ key to select 3D Sync Loop Through.
Image 12-169
3D sync loop through
4. Press ENTER to toggle between [On] and [Off].
[On] : 3D SYNC OUT is directly routed from 3D SYNC IN
[Off] : the internal 3D sync signal is available on 3D SYNC OUT, native or inverted as indicated in the 'Invert 3D Sync Out' setting.
R5905158 HDF SERIES 08/12/2016
Image 12-168
Alignment, 3D glasses
12. Alignment
289