Warp Adaptation Steps - Barco HDF W22 User And Installation Manual

12. Alignment

12.8.6 Warp adaptation steps

About the steps
An anchor point can be moved with a fixed number of steps: 1, 10 or 100. It is also possible to move an anchor point with custom
number of steps or a part of a step.
How to select a predefined number of steps
1. Use the ▲ or ▼ key to go to the Warp adaptation steps area.
The current selection is indicated in yellow.
2. Use the ◄ or ► key to select the desired steps.
Image 12-38
Warp adaptation steps
The following selection is possible:
- 100 pixels
- 10 pixels
- 1 pixel
- Custom
3. Press ENTER to accept the selection.
When Custom is selected, the step value can be changed.
How to change the custom step value
1. Use the ▲ or ▼ key to select Custom steps.
2. Use the ◄ or ► key to change the current value.
Image 12-39
Warp adaptation steps, custom
238 R5905158 HDF SERIES 08/12/2016