12. Alignment
12.8.11 Scaling the image
About scaling
It is possible to scale the whole image. This is considered as an equal scale of the 4 corner points in 2 x 2 mode. The Warping
adaptation window is used to scale the image.
How to scale
1. Select the 2 x 2 adjustment level. See "Setting the warping level", page 237.
The default selected anchor point is the left top corner of the image.
2. Select the desired warp area.
Depending on the selected area only the points in that area will be adjusted and the scale direction changes according the
selection.
3. Select Scale.
4. Select within Warp Adaptations, an available adjustment to scale the image.
Or,
press ENTER when an item is selected and use the 4 arrow keys to adjust.
Image 12-49
Warping, scaling
244
R5905158 HDF SERIES 08/12/2016