L-R Synchronisation, Field Dominance - Barco HDF W22 User And Installation Manual

8.9.6 L-R Synchronisation, field dominance
About field dominance
The Field dominance setting has only effect in the 3D mode: Frame sequential - Single channel (in all other modes this setting is
grayed out). Furthermore, the input frequency must be equal or lower than 100 Hz (50 Hz per eye). In case the input frequency is
higher than 100 Hz (50 Hz per eye, 59.94 & 60 Hz in practice), the "Field dominance" setting has no effect.
For the lower input frequencies (40 Hz or lower/eye), triple flash is used and for frequencies between 40 and 51 Hz/eye double
flashing is introduced and the coupling between the video input signal and the 3D SYNC IN signal must be determined.
This setting is stored per input.
How to activate
1. Press Menu to activate the menus and select Alignment → 3D Glasses → L/R Synchronisation.
Image 8-72
Main menu
Image 8-74
L/R Synchronisation
2. Press ENTER.
3. Use the ▲ or ▼ key to select Field Dominance.
Image 8-75
Field dominance
4. Press ENTER to toggle between [L/R] and [R/L]
[L/R] : The 3D SYNC IN signal is used to indicate the left and right field sequence.
[R/L] : The inverted 3D SYNC IN signal is used to indicate the left and right field sequence.
R5905158 HDF SERIES 08/12/2016
Image 8-73
Input, 3D
8. Input
137