Auto Detection - Barco HDF W22 User And Installation Manual

8.9.3

Auto detection

About auto detection
• Automatically detects the 3D format (Frame Packing, Side-by-Side, Top-and-Bottom) on HDMI sources, based on the content
of the HDMI Vendor Specific InfoFrame (if present). For a detailed explanation of the HDMI vendor specific InfoFrame, refer to
the HDMI 1.4a specification.
• Will select SENSIO
present.
• Does not support Frame Sequential modes (Single and Dual Channel).
• Is not available on other inputs (only on the inputs of the 3D input module) and will be grayed out.
Based on data in the InfoFrame and received feedback from the SENSIO
be selected:
3D format in InfoFrame
Frame Packing
Side-by-Side
Top-and-Bottom
No InfoFrame data present
How to activate/deactivate
1. Press Menu to activate the menus and select Input → 3D → Auto detection.
Image 8-62
Main menu
4. NA:feedback from SENSIO Autodetect is not applicable in thes cases
®
R5905158 HDF SERIES 08/12/2016
® 3D Decoder – FFC in case Side-by-Side or Top-and-Bottom mode is detected or if no InfoFrame data is
SENSIO
4
NA
Side-by-Side or SENSIO
Other
Top-and-Bottom
Other
4
NA
Autodetect core, the following formats (Input Type) will
®
® Autodetect feedback
Hi-Fi 3D
®
Image 8-63
Input, 3D
Input type selected
Frame Packing (FHD3D)
SENSIO 3D Decoder – FFC
®
Side-by-Side (Half)
SENSIO 3D Decoder – FFC
®
Top-and-Bottom (Half)
SENSIO 3D Decoder – FFC
®
8. Input
133