Front Xlr Output Voltage Control - Barco HDF W22 User And Installation Manual
Hdf series
Hide thumbs
Also See for HDF W22:
- Installation manual (381 pages) ,
- User and installation manual (333 pages) ,
- Use and installation manual (319 pages)
Table of Contents
Advertisement
13. Projector Control
13.7.5 Front XLR output voltage control
What can be done ?
The output voltage on the front XLR connector can be enabled or disabled.
The output voltage level can be set to 0V, 9V, 12V or 24V.
DMX Art-Net can also enable the output voltage on the front XLR connector. To avoid that per accident a voltage is activated via
DMX Art-Net, set level to 0 V
How to enable or disable
1. Press Menu to activate the menus and select Projector Control → DMX → Output voltage enable.
Image 13-77
Main menu, projector control
Image 13-79
Front XLR Output voltage enable
2. Press ENTER to toggle between [On] and [Off].
[On] : Front XLR Output voltage enabled.
[Off] : Front XLR Output voltage disabled.
Output voltage level setup
1. Press Menu to activate the menus and select Projector Control → DMX → Output voltage level.
328
Image 13-78
Projector control, DMX
R5905158 HDF SERIES 08/12/2016
Advertisement
Table of Contents
