Configure Projector's Light Output Via Sms - Barco HDF W22 User And Installation Manual

13. Projector Control
13.15.3 Configure projector's light output via SMS
Projector must be equipped with the optional GSM module.
What can be done ?
An SMS message with certain structure must be sent to the SIM card of the projector. This message will be picked up and decoded.
The projector will be configured according the content of the message.
How to configure
1. Create a new SMS message containing 3 parts:
- activation code (created in Projector Toolset)
- action string
- action parameter
separated by a space character.
Example : "1234 MLO 14"
2. Send this message to the GSM number associated with the projector.
The receiving projector analyses the message and configures the light output.
A result message is sent back to the requested cell phone.
354 R5905158 HDF SERIES 08/12/2016