Dmx - Barco HDF W22 User And Installation Manual

13.7 DMX

Overview
• DMX address
• DMX universe
• DMX mode
• Art-Net DMX
• Front XLR output voltage control
• Monitor
• DMX Shutdown
• DMX Shutdown retarding time
About the ways to control the projector via DMX
With a standard DMX cable equipped with XLR connector DMX signals can be connected to the DMX In port on the communicator
interface. The DMX out can be used to create a chain of DMX devices. One universe can control up to 512 channels.
If you are using a DMX console and other automated lighting products compatible with Art-Net, the Ethernet network can serve as
the link for DMX control. All DMX controls can be sent over the Ethernet cable. Multiple universes are possible.
R5905158 HDF SERIES 08/12/2016
13. Projector Control
321