Making Selections And Adjustments - Barco HDF W22 User And Installation Manual

12.8.7 Making selections and adjustments

About a Selection of a function
The current selection is indicated in yellow.
The current position of the cursor is indicated in blue.
The arrow keys are use to move the cursor to a new selection.
How to make a selection
1. Use the ▲ or ▼ key to select a pane .
The following panes are available:
- Warp area: full screen, left-right screen, top-bottom screen, one of the four quadrants.
- Warp mode. keystone, horizontal linearity, points, scale, shift, rotation, rotation point.
- Warp adaptation: this pane changes according to the warp mode selection.
2. Within a pane, use the ◄ or ► key to select the desired function.
3. Press ENTER to activate this function.
4. To adjust a value once selected, use the ◄ or ► key to change
Or,
press ENTER to open a separate adjustment window.
Use the arrow keys to make the adjustment.
Image 12-40
Warping, keystone
About Warp area
1 2 3 4 5
Image 12-41
Warp area
1 Full screen
2 Right side
3 Bottom side
4 Left side
5 Top side
6 4 quadrants
About Warp mode
1 2 3 4 5 6
Image 12-42
Warp mode
1 Keystone
2 Linearity
3 Points
4 Scale
5 Shift
R5905158 HDF SERIES 08/12/2016
6
7
12. Alignment
239