2. Configurations, requirements and restrictions
Image 2-3
5. Remove the wooden plate from the projector bottom, by releasing the four bolts. Use an 8 mm Allen key. See image 2-3.
6. Gently turn the projector back on its feet.
7. Remove the foam rubber around the carrying handle.
Save the original shipping carton and packing material, they will be necessary if you ever have to ship your
projector. For maximum protection, repack your projector as it was originally packed at the factory.
A plastic cap is placed into the lens opening of the projector. It's recommended to reuse this plastic cap each
time you transport the projector. This to prevent intrusion of dust and foreign particles.
20
R5905158 HDF SERIES 08/12/2016