Clo Targets - Barco HDF W22 User And Installation Manual

11. Lamp

11.8 CLO targets

What must be done?
The light output target can be set. This value will force the projector to produce the target lumens when the CLO mode is set to On.
How to set the target
1. Press Menu to activate the menus and select Lamp → Power → CLO mode.
Image 11-21
Main menu, lamp
Image 11-23
CLO Target lumens setup
2. Use the ◄ or ► key to change the CLO target lumens.
Depending on the projector model, the value range can be different. The screenshot is only given as information. For the exact
values, see the specifications of the specific projector.
216
Image 11-22
Lamp, power
R5905158 HDF SERIES 08/12/2016