Barco HDF W22 User And Installation Manual page 352

13. Projector Control
Press ENTER when the 4 digits are entered.
Image 13-136
PIN code entered
4. Select OK and press ENTER to configure the software.
Replacing a SIM card with a new one
1. Before removing the current mounted SIM card, select Projector Control → GSM configuration → GSM pincode
Image 13-137
Main menu, projector control
Image 13-139
GSM configuration, Pin code
2. Select Pin code with the current filled out code and press ENTER to clear the current code.
Image 13-140
Pin code filled
3. Select OK and press ENTER to configure the software.
4. Proceed with the SIM card replacement and follow the configure procedure as described above.
348
Image 13-138
Projector control, GSM configuration
R5905158 HDF SERIES 08/12/2016