About this chapter Read this chapter attentively. It contains important information to prevent personal injury while installing and using a HDF W series projector. Furthermore, it includes several cautions to prevent damage to the HDF W series projector. Ensure that you understand and follow all safety guidelines, safety instructions and warnings mentioned in this chapter before installing your HDF W series projector.
fixed wiring. • Never stack more than two (2) HDF W series projectors in a hanging configuration (truss) and never stack more than three (3) HDF W series projectors in a base stand configuration (table mount).
fire extinguishers. Never use water on an electrical fire. Always have service performed on this projector by authorized Barco service personnel. Always insist on genuine Barco replacement parts. Never use non-Barco replacement parts as they may degrade the safety of this projector.
If the product exhibits a distinct change in performance, indicating a need for service. • Replacement parts: When replacement parts are required, be sure the service technician has used original Barco replacement parts or authorized replacement parts which have the same characteristics as the Barco original part. Unauthorized substitu- tions may result in degraded performance and reliability, fire, electric shock or other hazards.
(RZ) in the theater must be established. This can be done by using physical barrier, like a red rope as illustrated in image 1-2. Image 1-2 HD in function of the lens Throw Ratio (TR) TR (Throw Ratio) The ratio of the distance to the screen (throw) to the screen width. R5905159 HDF W SERIES 12/02/2015...
Page 8
Important warnings concerning stacking/transporting HDF W series rental flight cases • Stack maximum two (2) HDF W series rental flight cases high. Never higher. • Surface on which flight case is standing must be level to ensure that the total load is evenly spread out among the four wheels.