3. Physical installation
A
B
B
Image 3-46
Mounting clamps
4. Place all four rigging clamps in open position as illustrated.
Image 3-47
Opening clamps
5. Place the projector (upside down) under the truss installation and lower the truss until the support bars of the truss are nearby
the rigging clamps mounted on the projector.
Image 3-48
Lowering and mounting truss bar
6. Lift up the projector and hook the four rigging clamps over the support bars of the truss.
7. Lock all four rigging clamps.
8. Install a safety chain (S) around both sides of the carrying handle and around the truss.
R5905158 HDF SERIES 08/12/2016
53