Using The Rcu - Barco HDF W22 User And Installation Manual

5.7

Using the RCU

Pointing to the reflective screen
1. Point the front of the RCU to the reflective screen surface.
Image 5-6
IR control via reflective screen
Hardwired to the XLR input
1. Plug one end of the remote cable in the connector on the bottom of the RCU.
2. Plug the other end in the big connector on the communication interface of the projector, labelled Remote CTRL.
Pointing directly to the IR sensor
When using the wireless remote control, make sure you are within the effective operating distance (30m, 100ft in a straight line). The
remote control unit will not function properly if strong light strikes the sensor window or if there are obstacles between the remote
control unit and the projector IR sensor.
45°
45°
Image 5-7
RCU to one of the IR sensors
R5905158 HDF SERIES 08/12/2016
45°
45°
5. Getting started
45°
45°
73