Cable Input - Barco HDF W22 User And Installation Manual

8.3.5

5 cable input

How to select
Select 5 cable and press ENTER to open the selections
Image 8-11
Advanced settings, 5-cable
Use the ▲ or ▼ key to select the desired configuration and press ENTER to select.
When e.g. CVBS/S-VIDEO AUTO is selected, the projector discovers itself which type of signal is connected to it and loads the
correct settings.
For RGB selections, advanced settings are possible. To adjust these advanced settings, use the ▲ or ▼ key to select Advanced
settings and press ENTER. The advanced settings menu opens:
Press ENTER to toggle between [Analog] and [TTL].
R5905158 HDF SERIES 08/12/2016
Image 8-12
5 cable configuration
8. Input
109