Barco HDF W22 User And Installation Manual page 354

13. Projector Control
The software checks if the + is entered and that at least 7 digits are entered. When it is not a valid number, the number field next
to the selected subscriber remain blank.
This procedure can be repeated for subscriber 2 and 3.
5. Select OK and press ENTER to configure the subscription.
How to unsubscribe via the OSD menu
1. Press Menu to activate the menus and select Projector Control → GSM configuration → Sms subscriptions.
Image 13-146
Main menu, projector control
Image 13-148
SMS subscription
2. Press ENTER to open the Edit mode. Clear the current number and press ENTER again.
3. Select OK and press ENTER to configure the software.
Subscribe or Unsubscribe via SMS
1. Create a new SMS message containing 2 parts:
- activation code (created in Projector Toolset)
- action string
separated by a space character.
Example :
to subscribe : "1234 SUBSCRIBE"
to unsubscribe : "1234 UNSUBSCRIBE"
2. Send this message to the GSM number associated with the projector.
The receiving projector analyses the message and add or remove the GSM number associated with the message.
A result message is sent back to the requested cell phone.
350
Image 13-147
Projector control, GSM configuration
Image 13-149
Subscriber 1
R5905158 HDF SERIES 08/12/2016