12.14.6 Data doubling
About data doubling
When a source (A) must be displayed via 2 projectors as one image (B), the vertical and horizontal start position and the size must
be determined so that each projector displays a part of the image. The overlap area can be adjusted with the Scenergix tools.
Vert.
Start 1&2
A
B
Image 12-131
Data doubling
A
Source
B
Projected image
Activate data doubling on both projectors and setup the vertical and horizontal start for projector 1 and projector 2.
How to setup
1. Press Menu to activate the menus and select Alignment → Scenergix → Data doubling.
R5905158 HDF SERIES 08/12/2016
Hor.
Start 1
Size 1
Projector 1
Hor.
Start 2
Size 2
Projector 2
12. Alignment
273