8.8.1
Configure an input
Description
Selecting the Standard EDID file or an own created file can be selected from the list of Custom EDID files for the input.
How to configure
1. Press Menu to activate the menus and select Input → EDID → Configure.
2. Press ENTER to open the EDID configuration menu.
Image 8-39
Main menu
Image 8-41
EDID, configure
Image 8-43
EDID selection list
3. Use the ▲ or ▼ key to select the input to configure.
Press ENTER to open the selection list.
The current active file is checked.
4. Use the ▲ or ▼ key to select the correct file.
Press ENTER to select this file.
Press EXIT to return to the EDID Configuration menu.
5. Use the ▲ or ▼ key to select Apply.
Your selection is applied and stored for this input.
The EDID Configuration menu remains open to configure another input.
Or,
use the ▲ or ▼ key to select OK.
Your selection is applied and stored for this input and the EDID configuration menu is closed.
R5905158 HDF SERIES 08/12/2016
Image 8-40
Input, EDID
Image 8-42
EDID configuration
8. Input
123