13.4.2 Interface Standard
What can be done?
The communication protocol for the communication between the projector and a computer can be set to RS232 or RS422.
How to set up
1. Press Menu to activate the menus and select Projector Control → Serial Communication.
Image 13-12
Main menu, projector control
2. Use the ▲ or ▼ key to select Interface Standard.
Press ENTER to toggle between [RS232] or [RS422].
Image 13-14
Interface standard
R5905158 HDF SERIES 08/12/2016
Image 13-13
Projector control, serial communication
13. Projector Control
299