Rotating The Image - Barco HDF W22 User And Installation Manual

12. Alignment

12.8.13 Rotating the image

About rotating
The image can be rotated around a predefined point. This is considered as an equal rotation of the 4 corner points in 2 x 2 mode
and with the full area selected. The default rotation point is the center of the image.
Image 12-51
Rotation
Selecting rotation point
1. Select full image as warp area (1).
1
Image 12-52
Rotation point, selection
2. Use the arrow keys to select Rotation point (2).
3. Select Warp Adaptations and use the arrow keys to move rotation point to the desired position (3).
Or,
press ENTER when an item is selected and use the 4 arrow keys to adjust.
Image 12-53
Warping, scaling
4. Continue with the rotation.
Rotate around the rotation point
1. Select the 2 x 2 adjustment level. See "Setting the warping level", page 237.
2. Select full image as warp area.
246
2
3
R5905158 HDF SERIES 08/12/2016