Gigabit-Ethernet Interfaces - Lucent Technologies LambdaUnite Installation Manual

Multiservice
Hide thumbs Also See for LambdaUnite:
Table of Contents

Advertisement

Gigabit-Ethernet Interfaces

....................................................................................................................................................................................................................................
Application Packs
Connector Type
....................................................................................................................................................................................................................................
4 - 6 8
The pack types are:
GE1 / SX / 4 — KFA13
See "Specifications for LambdaUnite
(B-14)for order codes and specifications.
Important! Only the fiber cables with listed comcode are allowed to
Cables
be used , otherwise the proper functioning of the system can not be
guaranteed.
The "Multi-Mode 62.5/125 Fiber-Optic Cables" (B-8) types are:
MM-minicord Break-Out Cable
MM-Simplex Cable
LC connector with an angled Boot 40-45 degrees for termination to
port units. Blue connector for SM, beige connector for MM. The LC
boot must remain freely rotatable around the connector length axis
after termination, in order to adjust its orientation to the fiber routing
direction without damaging the fiber.
Lucent Technologies
Cable Installation
MSS Optical-Circuit Packs"
Issue a, January 2002
365-374-059

Advertisement

Table of Contents
loading

Table of Contents