Lucent Technologies LambdaUnite Installation Manual page 27

General Notes on Safety
Basic Safety Aspects
Summary of important
safety instructions
....................................................................................................................................................................................................................................
365-374-059
Issue a, January 2002
The respective parts of the documentation must be strictly
observed. The documentation must also be consulted during the
selection of measuring and test equipment.
•
Calibrations, special tests after repairs and regular safety checks
must be carried out, documented and archived.
•
Non-system software is used at one's own risk. The
use/installation of non-system software can adversely affect the
normal functioning of the system.
•
Only use tested and virus-free data carriers (floppy disks,
streamer tapes, ...).
Especially observe the following safety instructions, since they are of
particular importance for LambdaUnite
•
This equipment is to be installed only in Restricted Access Areas
in business and customer premises.
Applications in accordance with Articles 110-16, 110-17 and
110-18 of the National Electrical Code, ANSI/NFPA No. 70.
Other installations exempt from the enforcement of the National
Electrical Code may be engineered according to the accepted
practices of the local telecommunications utility.
•
This product should only be operated from the type of power
source indicated on the marking label.
•
This equipment must be provided with a readily accessible
disconnect device as part of the building installation.
•
Disconnect up to four (4) power supply connections when
removing power from the system.
•
Installation must include an independent frame ground drop to
the building ground. Refer to the LambdaUnite MSS Installation
Guide.
•
For information on proper mounting instructions, consult the
LambdaUnite MSS Installation Guide.
•
Install only equipment identified in the LambdaUnite MSS
Installation Guide provided with this product. Use of other
equipment may result in improper connection of circuitry leading
to fire or injury to persons.
Lucent Technologies
™
MSS systems:
Safety
1 - 7