Table of Contents
Advertisement
Optical Interfaces
....................................................................................................................................................................................................................................
Application Packs
Connector Type
....................................................................................................................................................................................................................................
4 - 6 4
The pack types are:
•
OP2G5 — KFA 12, 203 and 204
•
OP10 — KFA 6, 7, 14, 9 and 81/159, 11 and 61/75
See "Specifications for LambdaUnite
(B-14)for order codes and specifications.
Important! Only the fiber cables with listed comcode are allowed to
Cables
be used , otherwise the proper functioning of the system can not be
guaranteed.
The "Break-Out Cables" (B-2) fiber types are:
•
SM-minicord BreakOut cable
•
SM-Simplex Cable
LC connector with an angled Boot 40-45 degrees for termination to
port units. Blue connector for SM, beige connector for MM. The LC
boot must remain freely rotatable around the connector length axis
after termination, in order to adjust its orientation to the fiber routing
direction without damaging the fiber.
Lucent Technologies
Cable Installation
™
MSS Optical-Circuit Packs"
Issue a, January 2002
365-374-059
Advertisement
Table of Contents
