Table of Contents
Advertisement
Required Tools and Test Equipment
....................................................................................................................................................................................................................................
Test equipment
....................................................................................................................................................................................................................................
365-374-059
Issue a, January 2002
Listed below are the tools needed while installing and testing.
Tools
Tool
ESD wrist strap
(included in the shelf delivery)
Isopropanol, compressed air
and wipes
Microscope with a
magnification x 200
LC attenuators
Unshielded crossed LAN cable
Unshielded straight LAN cable
CompactFlash card or
PCMCIA CompactFlash card
adapter
PC (Laptop)
A variety of test equipment is required to carry out the individual
tests. The following table provides an overview of the required
equipment. The types listed are suggestions only. Equipment of
another type or manufacturer can also be used.
Test equipment
SDH analyzer
(STM1-STM64)
Optical power meter
Optical spectrum
analyzer
Lucent Technologies
Overall Installation and Test Planning
Purpose
ESD protection
Fibre cleaning
Checking the connector face for
impurities
Optical attenuation
NE-PC (CIT) connections
NE-NE and NE-HUB connections
Initial load of CompactFlash card
Provisioning purposes via
®
WaveStar
Type
ACTERNA ANT-20E
(www.acterna.com)
ANRITSU MP 1570A
(www.anritsu.com)
HP 37718A
(www.hp.com)
ACTERNA OLP-15
ACTERNA OLS-155
CIT
Purpose
Testing different
interfaces depending
on applications
Optical power
measurement
Optical wavelength
and spectral with test
2 - 7
Advertisement
Table of Contents
