Lucent Technologies LambdaUnite Installation Manual page 241

Multiservice
Hide thumbs Also See for LambdaUnite:
Table of Contents

Advertisement

Setting up a Cross-Connection
....................................................................................................................................................................................................................................
365-374-059
Issue a, January 2002
STS-48
STS-192
Please note that it is not possible to proceed to the next window
before selecting the cross-connection rate.
............................................................................................................................................................
Select
2 Way Point-to-Point
4
Cross-connection
............................................................................................................................................................
Click on
to proceed to the next window.
5
Next>
Result:
Screen 2 of 3
............................................................................................................................................................
Click on
6
Select..
Result:
The
Ptn Grp
Grp
selection tab the system is displayed. The displays can be
expanded. Thus a tree of systems, bays, shelves, circuit packs,
and ports is depicted.
............................................................................................................................................................
Select one port in the list or enter the AID in the text box
7
above.
Result:
In the list box
belonging to the respective port are displayed.
............................................................................................................................................................
Select the VC/STS which shall be used as the source and click on the
8
Select...
button.
............................................................................................................................................................
Select the destination port in the
9
corresponding VC/STS in the
Select...
button.
Lucent Technologies
in the group box
.
opens.
. to select the source tributary.
selection tab appears. In the list box of the
on the right, the AIDs of all VCs/STSs
Tributary
Ptn Grp
Tributary
Commissioning
Type of
Enter AID:
selection tab and the
list box and click on the
Ptn
5 - 3 7

Advertisement

Table of Contents
loading

Table of Contents