Table of Contents
Advertisement
3
Equipment Installation
Overview
....................................................................................................................................................................................................................................
Purpose
Rack types
Required area
Contents
....................................................................................................................................................................................................................................
365-374-059
Issue a, January 2002
The purpose of this chapter is to provide the information needed to
install all mechanical parts of a LambdaUnite
(MSS) system.
The following rack types are available:
•
ETSI-2 (International Market)
•
NEBS-2000 (USA Domestic Market)
The racks require an area of 600 mm [23.622"] x 600 mm [23.622"]
(width x depth). This area represents the absolute system limits which
must not be exceeded in the operating state by protruding elements
such as switches or plugs. The standard height is 2200 mm [86.614"]
for an ETSI-2 rack and 2145 mm [84.448"] for an NEBS-2000 rack.
Rack Materials (ETSI-2)
Technical Data (ETSI-2)
Floor Mounting (ETSI-2)
Rack Materials (NEBS-2000)
Technical Data (NEBS-2000)
Floor Mounting (NEBS-2000)
Lucent Technologies
™
MultiService Switch
3-3
3-6
3-9
3-12
3-14
3-17
3 - 1
Advertisement
Table of Contents
