Gigabit Ethernet Interfaces - Lucent Technologies LambdaUnite MSS Installation Manual

Multiservice switch
Table of Contents

Advertisement

Fiber cabling

Gigabit Ethernet interfaces

....................................................................................................................................................................................................................................
Application packs
Connector type
....................................................................................................................................................................................................................................
365-374-074
Issue a, April 2002
The following pack type is available:
GE1/SX4.
See
"Specifications for LambdaUnite
(C-15)
for order codes and specifications.
Important! Only the fiber cables with listed comcode are allowed to
Cables
be used , otherwise the proper functioning of the system can not be
guaranteed.
The types of
MM-minicord break out cable
MM-simplex cable.
LC connector with an angled Boot 40-45 degrees for termination to
port units. Blue connector for SM, beige connector for MM. The LC
boot must remain freely rotatable around the connector length axis
after termination, in order to adjust its orientation to the fiber routing
direction without damaging the fiber.
Lucent Technologies
"Multi-Mode 62.5/125 fiber-optic cables" (C-8)
System cabling and final assembly
MSS optical circuit packs"
are:
4 - 6 1

Advertisement

Table of Contents
loading

Table of Contents