Table of Contents
Advertisement
Setting up a Cross-Connection
....................................................................................................................................................................................................................................
Overview
Before you begin
Procedure
....................................................................................................................................................................................................................................
5 - 3 6
This section provides a procedure for setting up a cross-connection.
Prior to performing this task, you must be logged into the WaveStar
CIT and the respective network element.
Required privilege code
You must have at least a privilege code of P3 to create new
cross-connections. For some fields privilege code M1 is required.
Required equipment
The following equipment is required to perform this task:
•
WaveStar CIT.
Complete the following steps to create a new cross-connection:
............................................................................................................................................................
Call up the
1
Cross-Connection Wizard
Cross-Connections...
............................................................................................................................................................
Click on the radio button
2
on
Next>
.
Result:
appears.
Screen 1
............................................................................................................................................................
Define the cross-connection rate in the drop-down list box
3
following values are possible:
•
(default value)
VC-3
•
VC-4
•
VC-4-4c
•
VC-4-16c
•
VC-4-64c
•
STS-1
•
STS-3
•
STS-12
Lucent Technologies
Configuration →
via
in the
of the WaveStar CIT.
System View
Create a new cross-connection
Commissioning
®
and click
Rate:
. The
365-374-059
Issue a, January 2002
Advertisement
Table of Contents
