Table of Contents
Advertisement
Network Test: Remote Login
....................................................................................................................................................................................................................................
Overview
Test setup
Procedure
....................................................................................................................................................................................................................................
365-374-059
Issue a, January 2002
Important! This test can only be done after the DCC channels have
been configured correctly (see Chapter 5, section "Configuring the
Data Communication Network (DCN)" (5-30)).
The test ensures the accessibility to all NEs via remote login. In the
test procedure a protected ring configuration will be used as example.
However, the described procedure is in principle also valid for other
network topologies.
East
NE-D
West
Perform the following procedure to test the NE control and
supervision functionality via remote login:
............................................................................................................................................................
1
Login to the NE-A as described in Chapter 5, section "NE
Login/Logout procedure" (5-19).
Lucent Technologies
NE-C
Port 1
Port 1
West
East
Out
In
Port 1
Port 1
In
Out
®
WaveStar CIT
NE-A
Port 1
Port 1
West
East
Out
In
Port 1
Port 1
In
Out
Test Procedures
West
NE-B
East
6 - 1 3
Advertisement
Table of Contents
