Lucent Technologies LambdaUnite Installation Manual page 66

Required Tools and Test Equipment
WaveStar CIT
requirements
....................................................................................................................................................................................................................................
2 - 8
Test equipment
Ethernet analyzer
Adjustable optical
attenuator
Multimeter
The minimum requirements for a WaveStar CIT are a personal
computer with:
•
®
Pentium 266 MHz processor (Pentium III 500 MHz or higher
recommended) with 128 MB of RAM (256 MB of RAM or
higher recommended)
•
150 MB of free hard-disk drive space
•
CD-ROM drive (16X recommended)
•
™
CompactFlash
•
SVGA monitor set to 800x600 resolution or greater, with 256
colors (1024x768, 16 million colors recommended)
•
100BaseT LAN interface, installed and working
•
Unshielded crossed Ethernet LAN cable with 4-wire RJ-45
connectors
•
®
Microsoft Windows NT
®
Windows 2000 operating system
•
® ®
Adobe Acrobat
•
Removable hard-disk drive (optional; required only for system
backup).
The performance of the user interface can be enhanced by using a
higher performance personal computer.
Lucent Technologies
Overall Installation and Test Planning
Type
IXIA 400 with
1G/SX-2 interfaces
ACTERNA OLA-35
FLUKE 8060
card
®
4.0 with Service Pack 5 or Microsoft
®
Reader for Windows (version 3.01 or later)
Purpose
Measuring 1 Gigabit
Interfaces
Optical power
measurement
Measuring -48V/-60V
DC power supplies
365-374-059
Issue a, January 2002