....................................................................................................................................................................................................................................

365-374-059

Issue a, January 2002

Item 2) on the upright of the Unite rack-frame within its configuration

position by using ( Screw, Tapping Thread-Forming, M6x16 —

CC901331421 Item 4), but do not fasten completely.

............................................................................................................................................................

Mount the subrack on the mounting brackets at the front from inside

the subrack by using Screw Hexagon Socket Button Head M4x8 —

DC1002976 (item 7), but do not fasten completely.

............................................................................................................................................................

Fasten the front and rear Screw, Tapping Thread-Forming, M6x16 —

CC901331421 (Item 4) and Screw Hexagon Socket Button Head

M4x8 — DC1002976 (item 7).

............................................................................................................................................................

Mount the Fiber-Routing Guides (corner) — DC1001518 (Item 3) at

each corner of the subrack by clicking them into the holes at the top

and bottom sides of the subrack.

N D

O F

T E P S

............................................................................................................................................................

Lucent Technologies

Equipment Installation

3 - 5 3

Table of Contents